Measurement of a wireless network’s coverage area is done using a sort of wireless engineering called a wireless site survey.
Any wireless network’s coverage and performance can be evaluated with the use of a wireless site survey. They are employed to establish the service, coverage, and performance standards necessary for a particular place.
The procedure is figuring out how many, what kind, and where to put the antennas to get the coverage you want.
1. How should a wireless site survey be done?
A wireless site survey is a procedure used to learn more about the availability of wireless service in a certain location. The survey’s objectives are to locate wireless access points, locate areas with poor coverage, and gauge signal strength.
The first step in the procedure is deciding where the survey has to be done. After locating the area, you must map it out and locate all nearby wireless access points. You can either use an app like Wi-Fi Finder, which will automatically locate all wireless networks nearby; or you can look at the map and make a note of any Wi-Fi hotspots that are highlighted on it.
Once you have located every possible access point; mark their locations on your map or use a programme like Wi-Fi Finder. This is to display their locations and signal strength on your screen. When looking for available Wi-Fi networks; you may then compare these data with what is shown on your device’s screen to identify any potential hidden networks. Turn your device away from other devices in your immediate area and toward the sky for improved reception if you want a stronger signal. For instance, if I wanted to locate the Wi-Fi location in the library; In order to gain a better connection; I would search for access points near or on top of it as well as next to some trees or shrubs.
2. How should a site survey report be interpreted?
The first stage in designing a wireless network is doing site surveys. They are carried out to give a picture of the surroundings and spot any potential problems.
Detailed information on the site, such as its location, size, and infrastructure, is provided in a site survey report. It also contains details on any potential sources of interference (like other wireless networks). These can degrade the strength or coverage of the signal. What should be in a site survey report is: the precise position of the wireless network; including the building’s design and surroundings. The location’s past (such as whether it was previously used for a wireless network). A list of any adjacent structures that could impede signal reception, such as walls or other buildings. The present infrastructure, which includes antennae and access points. Any potential sources of interference that could reduce signal coverage, including other wireless networks.
3. An instruction manual for the site survey.
The process of assessing a location to see if it is suitable for the establishment of a wireless network is known as a wireless site survey.
An engineer can do a site survey on-site or remotely utilising tools like a portable spectrum analyzer. Although the on-site method is more accurate, it is also more costly and time-consuming.
Three steps make up the site survey:
Determine the required coverage area for each location. If the proposed locations are suitable for installation, and any potential radio system interference issues at each proposed location.
4. What characteristics should a site survey report contain?
An essential phase in the process of organising, designing, and constructing wireless networks is a wi-fi site survey. Before you begin your search, it is crucial to know what you are looking for. And what information to anticipate from the site survey report.
Some essential ideas to bear in mind when reading a site survey report include the ones listed below:
– The site survey’s findings should be simple to read and comprehend.
– The region surveyed should be accurately described in the report.
– Any potential interference with surrounding systems, such as TV broadcast towers or other wireless systems, should be analysed.
– Additionally, any environmental elements like trees or buildings. IT can have an impact on RF signal propagation should be examined in the report.
Conducting a site survey is an essential part of designing and organizing a wireless network. An important document that serves as the foundation for the final network architecture is a site survey report.