How do I access my Wavlink WING 12M LOGIN PAGE?

You may connect the Wing extender to your wireless router or modem using the Wavlink WING 12M setup instructions. By using a WIFI booster, you can improve the signal of your existing wireless network and guarantee continuous access to far-reaching devices.

How do I install Wavlink WING 12M extender?

Step-by-Step Setup Manual for the Wing AC1200 12m Range Extender:

  • Connect the Wing Extender to the wifi device.
  • To launch the browser, type ap.setup or the IP address
  • Use the default login and password to get to the setup screen.
  • The repeater scans the region for signals.
  • Select your home’s WiFi network by clicking it.
  • Now that you have entered the WiFi password, select Next.
  • Before linking your booster to your home network, wait 30 seconds.
  • The Wing 12m Extender system has now been fully installed.
  • Place the extender close to the area without internet and gain better connectivity.

Note: Contact our expert or go to the official website, ap.setup, for help with your Wavlink Wing 12m wifi extender if you need it.

 Wavlink WING 12M Setup via manual method

how to get to the manual setup page for the Wing 12m wifi extender

  1. Open the box and connect the Wing 12m extender into the outlet.
  2. Press the power button as soon as the power LED light goes green.
  3. Now join the Ap extender configuration _Ext network with your WiFi device.
  4. Type Ap.setup into any open web browser.
  5. You are currently on the setup page for the Wavlink Wing 12m Ac1200.
  6. Create an account for AP Login and then follow the guidelines.

WPS Setup for Wavlink Wing 12m Extender

Using the wireless protected setup (W.P.S) button during setup is one of the easiest methods to connect the extender to an existing wifi network.

  • Set up your Wing ac1200 according to these steps to install the extender:
  • As a first step, position the extender close to the main wifi modem or router.
  • Now the Wavlink wireless extender is operational.
  • then keep an eye out for a strong green power advantage to emerge.
  • Press the W.P.S button to turn on the power led for the extension.
  • By heading to the router/modem right now, press the W.P.S button.
  • Your router and the extender both have a green indicator that blinks.
  • Give the extension and home wifi 1-2 minutes to connect.

High gain antennas and PoE are features of the AERIAL HD4 – AC1200 Dual-band Outdoor Wireless AP/Range Extender/Router. (WL-WN572HG3

meets the requirements of IEEE 802 11a, b, g, and n

  • Dual-Band RJ45 Connection with Up to 2.4GHz 300Mbps and 5GHz 867Mbps Speeds, Integrated Passive Power Over Ethernet (PoE) Capability, and Weatherproof Offers good performance at a long-distance link and is designed for flexible deployment based on its antenna.
  • has a better receiver design and can produce up to 1000mW of electricity.
  • Strong waterproof case withstands demanding weather conditions.
  • Maximum Security with WPA and WPA2 3 LED Support Built-in Bluetooth Signal Power Lightning Arrester (15kV ESD)

Wavlink WING 12M Setup using an access mode

Once the real connection and wavlink ac1200 login steps are complete, you can start the installation process. Follow these simple instructions:

  1. You will see the Wavlink AC1200’s settings tab on screen.
  2. It is possible to choose your time zone and country/region using the drop-down menus.
  3. Enter the updated login details on your web interface screen.
  4. After choosing the “Access Point” operating mode, proceed according to the on-screen directions.
  5. Select the wifi network connected to the main router that you want to add an extender to.
  6. Enter the same wifi password you used for your house router into your outdoor extender.
  7. Allow time for the change to take affect. This could take a little work.
  8. In order to access your outside AP, locate its wireless network name and enter your wifi setup.
  9. Your external wavlink ac1200 extender is now fully set up. The device is now yours to place wherever you like.

The Wavlink ac1200 access point configuration was the centre of attention. If you followed the guidelines in the guidance, there shouldn’t be any problems. Don’t neglect to enter the default login password the first time you use the wavlink web interface. If you require any additional assistance, you can reach us via live chat or our toll-free phone. Every day of the week, 24 hours a day, we have a team of specialists ready to help you.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button